Digital Zoom - Panasonic TH-42PWD6 Operating Instructions Manual

Digital Zoom

This displays an enlargement of the designated part of
the displayed image.
1
Display the "Operation Guide".
MOVE
The "Operation Guide" will be displayed.
SURROUND
N
PICTURE SOUND
MULTI
PIP SWAP
PICTURE
POS. /SIZE
PC
2
Select the area of the image to be enlarged.
3
Select the magnification required for the enlarged display.
4
Return to normal display (quit Digital Zoom).
Notes:
(1) When power goes OFF (including "Off Timer" operation), Digital Zoom terminates.
(2) The Digital Zoom function cannot be selected while in the following operation states:
• "Multi-screen" (MULTI DISPLAY). (see page 28)
• "Multi-viewer" (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 10)
(3) While Digital Zoom is in operation, "Adjusting Picture Pos./Size" cannot be used.
(4) For RGB/PC input signals, normal multi-display magnification is only available at the VGA, SVGA and XGA resolution.
(5) The Digital Zoom capability is functional for the following component signals:
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i
(6) The Digital Zoom capability is functional for the following composite signals:
NTSC, PAL, SECAM
Press to access Digital Zoom.
SURROUND
button
INPUT
MUTE button
VOL
VOL button
R
SET UP
ZOOM
SELECT MOVE
ASPECT
OFF TIMER button
OFF TIMER
Press on the enlargement location to select.
The cursor will move.
Each time this is pressed, the magnification factor changes.
This is shown in the image being displayed.
R
Press to exit from the Digital Zoom.
• During Digital Zoom, only the following keys
can be operated.
R - STANDBY
G POWER ON
TH-42PWD6
1
Exit
1
– +
INPUT MENU VOL ENTER
Exit
2 3
2
21