Table of Contents
Advertisement
TRENDnet User's Guide
Basic Installation
Note: It is recommended to plug the adapters into nearby outlets before installing the
devices to the desired locations.
Note: If you are connecting the adapters to a third party powerline device other than
TRENDnet and encounter issues, please refer to the manufacturer's documentation for
the appropriate sync button procedure.
Note: The sync button procedure steps below demonstrate using TRENDnet powerline
model TPL‐406E (included with the Powerline 500 Wireless Kit only) but the same
procedure applies to TRENDnet powerline models TPL‐407E/ 420E / 421E.
Connecting the adapters using Powerline
© Copyright 2016 TRENDnet. All Rights Reserved.
5. Once you have successfully connected the powerline adapters through the electrical
system, you can move the TPL‐410AP to the desired location to create or extend
wireless connectivity to your existing network.
6. For added security the TPL‐410AP has been pre‐configured with a unique wireless
network name (SSID) and wireless key which can be found on the Preset Wireless
Settings sticker or device label. Use these settings to connect your wireless laptops,
mobile devices, and other wireless network devices to your network.
Move TPL‐410AP to the desired location and connect your wireless network devices
TPL‐410AP / TPL‐410APK
5
Hide quick links:
Advertisement
Table of Contents
