Table of Contents
Advertisement
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
Mode
Color system
Panasonic
AUTO (4:3)
3:2 PULLDOWN
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are
recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) or
COMPONENT input signal mode. ("SIGNAL [VIDEO]" menu is displayed.)
Note:
When ON, this setting only affects the following signal input:
• NTSC signal input during "VIDEO (S VIDEO)" input signal mode.
• 525i(480i) signal input during "COMPONENT" input signal mode.
R
Press to select the "COLOR SYSTEM" or
"Panasonic AUTO".
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Set the color system to match the input signal. If set to "AUTO", the color system is
determined automatically.
AUTO
PAL
Set to "NORMAL" to view 4:3 images in an unchanged format when Panasonic AUTO
is selected. If you would like to view 4:3 images in "Just" format, set to "JUST".
Press to select 3:2 PULLDOWN.
Press to set ON/OFF.
Press to exit from adjust mode.
SET UP for Input Signals
Function
SECAM
M NTSC
SET UP
COMPONENT/RGB-IN SELECT
RGB
SIGNAL
SCREENSAVER
OSD LANGUAGE
ENGLISH ( US )
Press
(ACTION) button
[ VIDEO ]
SIGNAL
3D Y/C FILTER ( NTSC )
ON
COLOR SYSTEM
AUTO
3:2 PULLDOWN
OFF
Panasonic AUTO ( 4:3 )
NORMAL
NTSC
SET UP
COMPONENT/RGB-IN SELECT
RGB
SIGNAL
SCREENSAVER
ENGLISH ( US )
OSD LANGUAGE
Press
(ACTION) button
[ VIDEO ]
SIGNAL
3D Y/C FILTER ( NTSC )
ON
COLOR SYSTEM
AUTO
3:2 PULLDOWN
OFF
Panasonic AUTO ( 4:3 )
NORMAL
[ COMPONENT ]
SIGNAL
3:2 PULLDOWN
OFF
33
Advertisement
Table of Contents
