Network Setting; Viera Cast Setting - Panasonic TC-P54Z1 Quick Start Manual

■
Press to exit from
a menu screen
Note
To change setting
(Language/
ANT/Cable setup/

Network setting/

VIERA CAST setting/

Clock/Input labels)
later, go to Menu
screen
(p. 42)
Select "Auto program"
ANT/Cable setup
Cable
ANT in
Auto program
Select scanning mode
Auto program
All channels
Analog only
Digital only
S l OK
Start scanning the channels
Auto program
Progress
8%
Number of analog channels
10
Number of digital channels
0
Press RETURN to quit.
RETURN
Confirm registered channels
program
Apply Cancel
l Caption Favorite Add
...
... Yes
...
... Yes
...
... Yes
If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the "Manual program" menu will also exit automatically.
If you perform scanning more than twice, previously saved channels are erased.
Network setting
First time setup
Language
ANT/Cable setup
Network setting
VIERA CAST setting
Network setting (p. 50-51)
Clock
Input labels
VIERA CAST setting
First time setup
Language
ANT/Cable setup
Network setting
VIERA CAST setting
Clock
Input labels
VIERA CAST setting (p. 52-53)
next
select
(ALL channels/Analog only/Digital only)
ok
select
Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
select "Apply"
ok
select
ok
select
ok
23