JVC VN-X35U Instructions Manual page 51

VN-V25U_26U_EN.book Page 51 Wednesday, September 3, 2008 8:03 PM
A
Action For specifying the type of action.
Disable
Mail
FTP
TCP
UDP
TCP/UDP Data : Input up to 127 alphanumeric characters.
Output 1 Make
Output 1 Break
Output 2 Make
Output 2 Break
Position
Play Audio
B
1st Trigger For specifying the first trigger to be activated.
[Set values:Input 1 Make, CInput 2 Make, CInput 1 Break, CInput 2
Break, Motion detection, CPosition]
Memo:
: Does not trigger any action.
: Sends out e-mail. Specify the recipient's mail address. The title
of the mail will appear as [Alarm from VN-X35U] and the sender
as [Camera ID]. Enter the message to send in [Mail Text]. Input
up to 127 alphanumeric characters. To attach the latest image
to the mail, set [Attach Image] to AOnB.
: Sends out pre-/post-recorded JPEG files via FTP. See the page
on Alarm Environment for details on pre-/post-recording and
FTP server settings. (A Page 56)
The maximum transmission rate of FTP is 1 Mbps. If a new FTP
trigger occurs during post-recording, the recorded portion is
treated as pre-recording and a new post-recording starts.
During FTP transmission after completing the post-recording, a
new post-recording starts if a new FTP trigger occurs.
: Sends out the character string entered in the [TCP/UDP Data]
field to the destinations specified in [TCP/UDP IP Address] and
[TCP/UDP Port Number] via TCP.
: Sends out the character string entered in the [TCP/UDP Data]
field to the destinations specified in [TCP/UDP IP Address] and
[TCP/UDP Port Number] via UDP.
: Changes Alarm Output 1 to Make.
: Changes Alarm Output 1 to Break.
: Changes Alarm Output 2 to Make.
: Changes Alarm Output 2 to Break.
Set the alarm output time in the [Alarm Output Duration]
field.
: Moves to the preset position specified in the
Position No.
: Play back an Audio File registered on VN-X35U
(A Page 49)
● When the second trigger is turned off, the action will be invoked only by
the first trigger.
● If [Motion detection] or [Position] is selected as the first trigger,
[Max.Interval] and [2nd Trigger] cannot be selected..
E.(A
item Page 53)
Action
51