JVC VN-X35U Instructions Manual page 43

VN-V25U_26U_EN.book Page 43 Wednesday, September 3, 2008 8:03 PM
G
Color Level For adjusting the color level.
Larger value
Smaller value : Decreases the color level.
[Setting values: -5 to 0 to 5]
H
AGC For setting the AGC (automatic gain control) level.
Off
Mid
High
Super
[Set values: Off, Mid, High, Super]
I
Sense Up This feature is used to raise the sensitivity level by lengthening the exposure
time.
You can specify the number of times by which the sensitivity level is to be
increased automatically when the object becomes dark.
selected, the sensitivity level will automatically increases continuously until it
is 16 times of the level when
increases, the shutter speed slows down and motion becomes unnatural.
When set to AOffB, [Sense Up] is disabled.
[Set values:
J
ALC Priority For setting the priority of ALC (feature for maintaining the video level
according to the brightness of the object). You can select whether to assign
priority to the motion or picture quality when the object becomes dark.
Motion
Quality
[Set values: Motion, Quality]
: Increases the color level.
: Disables the AGC feature
: When the amount of light is insufficient
: When the amount of light is particularly insufficient
: When the brightness level is insufficient even upon setting to
High.
Memo:
● This feature cannot be configured when the Easy Day/Night feature is
set to Black and White or Auto.
● The screen appears grainy at dark locations when the AGC feature is in
use.
x2(1/7.5s), x4(1/3.75s), x8(0.5s), x16(1.1s),
Memo:
● Upon raising the sensitivity level, the screen may appear grainy or white,
or white defects may occur. However, this is not a malfunction.
● When Sense Up is set to a value other than AOffB, flickers occur under
the light of fluorescent or mercury lamps. This is not a malfunction of the
camera, but is due to principles related to Sense Up.
● When the shutter is set to a value between 1/250 to 1/10000, set
Sense Up to AOffB.
: Assigns priority to motion.
When the object becomes dark, priority is given to AGC
(automatic gain control), and therefore this is suitable for
shooting fast-moving objects.
: Assigns priority to picture quality.
When the object becomes dark, priority is given to the Sense
Up feature, and therefore this is suitable for shooting objects
requiring a high picture quality.
AOffB
is selected. When the sensitivity level
When Ax16B is
x22(1.5s)]
43