JVC VN-X35U Instructions Manual page 101

VN-V25U_26U_EN.book Page 101 Wednesday, September 3, 2008 8:03 PM
Title Bar
A
Camera ID
B
Position Title
C
Time
D
Format
Stream Settings
A
Stream
B
HTTP Port
C
Multicast IP
Address
D
Multicast Port You can change the multicast port number.
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.
Select AOnB to display [Camera ID].
[Camera ID] can be specified on the [Basic Setting1] or [Camera] page
of VN-X35U.
(A Page 41)
Selecting AOnB displays the Position Title.
Select AOnB to display the time.
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
For specifying settings for receiving MPEG4 stream.
For selecting the protocol when the viewer acquires data from VN-X35U.
When AHTTPB is selected, lost packets are recovered via resending.
VN-X35U may be monitored using multiple viewers when
AMulticastB is selected.
When playing back via multicast., start multicast sending on the
[Streaming] page of the VN-X35U unit.
Note:
● When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select AunblockB
and proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the [Protocol]
page of VN-X35U. (A Page 67)
You can change the multicast IP address.
The default address is 225.0.2.1.
The default port number setting is 59152.
This is enabled when AStartB is selected for the [MPEG4 Control] item
on the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-X35U. (A Page 69)
101