Canon POWERSHOT PRO1 User Manual page 74

Shooting Panoramic Images (Stitch Assist) (continued)
3
Shoot the first image.
The exposure and white balance settings are set and locked with
the first image.
4
Compose and shoot the second image so that it
overlaps the first.
Minor discrepancies in the overlap can be corrected with the
software.
An image can be retaken. Press the
selector to return to that frame.
Sequence
5
Use the same procedures to shoot the remaining
frames.
A maximum of 26 images can be recorded either horizontally or
vertically.
6
Press the SET button after the last shot.
A custom white balance setting (p. 94) cannot be set in
mode. To use a custom white balance setting, first set it in
another shooting mode.
The settings in place for the first image are locked in and cannot
be changed for subsequent shots.
A TV cannot be used as the monitor for shooting in this mode.
See page 206 for settings that can be changed in this mode.
70
Downloaded From camera-usermanual.com Canon Manuals
or arrow on the omni
Sequence