Canon POWERSHOT PRO1 User Manual page 171

Problem
White dots or white
asterisks appear on
the image
Flash will not fire
Image not showing on
TV
Zoom will not
operate
CF card image
reading is slow
Recording images
on the CF card takes
too long
Downloaded From camera-usermanual.com Canon Manuals
Cause
Light from the flash has
reflected off dust particles
or insects in the air. This
occurs more frequently in
the following conditions:
• When shooting at the
wide angle end.
• When shooting with a
high aperture value in
the aperture-priority AE
mode.
Flash set to Off
Incorrect video system
setting
Shooting mode set to
(Stitch Assist)
Zoom ring turned while
shooting in movie mode
[Convert] set to other
than [None]
Camera set to Super
Macro mode
Currently used CF card
has been formatted in a
different device.
Solution
This is a phenomenon that
occurs with digital
cameras and does not
constitute a malfunction.
Set the flash to Auto or On.
Set the video system to
the appropriate setting,
NTSC or PAL, for your TV
(p. 50).
The output will not appear
on a TV monitor in
(Stitch Assist) mode.
Shoot in a different mode.
Operate the zoom before
shooting in movie mode.
If any conversion lens is
mounted, remove it and set
[Converter] to [None].
See Setting the Camera
Lens to the Most
Appropriate Position
(p. 180).
Cancel Super Macro
mode.
See Super Macro Mode
(p. 75).
Use a CF card formatted
with this camera.
See Formatting a CF
Card (p. 139).
167