Basic Controls - Panasonic TC-14LA1 Operating Instructions Manual

Basic Controls

POWER
TV/VIDEO button
Main POWER switch
First press the POWER switch to turn the set on.
Operate your Remote control pointed to the Remote control sensor
(Within about 6 meters in front of the TV set.)
Power button
Press to turn this set ON or OFF.
(See page 13)
Note:
The LCD TV's power cord must
first be plugged into the wall
outlet and then turned on at the
Main POWER switch.
Changes to the next channel up
Moves cursor upward during menu
mode.
Increases volume
Reduces volume
Moves cursor to
Moves cursor to
the right during
the left during
menu mode.
menu mode.
Changes to the next channel down
Moves cursor downward during menu
mode.
MENU button
MENU
Press to display
ADJUST
MENU screen, PICTURE
PICTURE ADJUST
press again to AUDIO
AUDIO ADJUST
clear.
Direct program number
Selection buttons
R-TUNE button
Switches to previously viewed
channel or video mode.
ASPECT button
4 : 3
16 : 9
<Top Side Controls>
TV/VIDEO VOLUME
Volume Up/Down
Channel Up/Down
TV/VIDEO button
The input mode
changes each time
this button is pressed.
SET UP
CHANNEL
Remote control sensor
MUTE button
Press to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
RETURN button
Press to return to the previous
screen.
RECALL button
Press to display time, channel, sleep
timer and other options.
SAP button
Selects Audio mode (See page 21).
SLEEP button
The LCD TV may be preset to switch
to stand-by after a fixed period. The
setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes
(SLEEP timer cancelled) each time
this button is pressed.
When 3 minutes remain, "
flash. The SLEEP timer is cancelled
if a power interruption occurs.
Before the timer automatically turns
the power off, the remaining time will
blink on the screen ("3" for 3 minutes,
"2" for 2 minutes and "1" for 1 minute
before the power goes off).
STEREO SAP
30 60
0
MONO
90
3 " will
15