Table of Contents
Advertisement
I
Basic Controls
<Top Side Controls>
Remote control sensor
I
TVNIDEO
button
Volume Up/Down
Channel Up/Down
Main POWER switch
First press the POWER switch to turn the set on.
Operate your Remote control pointed to the Remote control sensor
(Within about 6 meters in front of the TV set,)
Power button
TVNIDEO
button
(See page 13)
Note:
The LCD TV's power cord must
first be plugged into the wall
outlet and then turned on at the
Main POWER switch.
The input mode
changes
each time
this button is pressed.
Changes to the next channel up
Moves cursor upward during menu
mode.
Reducesvolume Increasesvolume
Moves cursorto
Movescursorto
the left during
the dgh during
menu mode. _
menu mode.
I
Changesto the next channeldown
Movescursordownwardduringmenu
mode.
MENU button
Press to display
MENU screen,
press again
to
clear.
Direct program numbs
Selection buttons
R-TUNE button
Switches to previously viewed
channel or video mode.
ASPECT
button
[_4:3-_16:9-_]
button
Press to mute the sound.
Press again to reactivate sound.
Sound
is also reactivated
when
power is turned off or volume level
is changed.
--
RETURN button
Press to return
to the previous
screen.
--
RECALL button
Press to display time, channel, sleep
timer and other options.
Selects Audio mode (See page 21 ).
[_" STEREO "_
SAP "_D
MONO "_]
_- SLEEP button
The LCD TV may be preset to switch
to stand-by after a fixed period. The
setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes
(SLEEP timer cancelled) each time
this button is pressed.
[_30 ---------------_
[_60 ---------------_
[_ 90 ]
When 3 minutes remain, "[]
3 "will
flash. The SLEEP timer is cancelled
if a power interruption occurs.
Before the timer automatically turns
the power off, the remaining time will
blink on the screen ("3" for 3 minutes,
"2" for 2 minutes and "1" for 1 minute
before the power goes off).
15
Advertisement
Table of Contents
