Connections
Cable cover removal and fitting
Removal
2
1.Disengage the claws at the
1
uppermost end.
2.Slowly pull out in the
upward direction.
Note: Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be
routed through the antenna cover.
Connecting Headphones / Earphones
Connect headphones / earphones as follows.
DC IN 15V
ANT
Use Volume Up
12
or Down
button to control volume level. (See page 15)
Fitting
2
1.Insert the claws (at 2 points)
2.Push in the TOP.
1
(M3 plug)
at the bottom.
(Optional)