Basic Controls - Panasonic TC-22LT1 Operating Instructions Manual

Basic Controls

Power button
Press to turn this unit ON or OFF.
(See page 13)
Note:
The Wide LCD TV's power cord must
first be plugged into the wall outlet
and then turned on at the Main
POWER switch.
Direct program number selection
buttons .
R-TUNE button
Switches to previously viewed
channel or video mode.
Moves cursor upward
during menu mode.
Moves cursor to Moves cursor to
the left during the right during
menu mode. menu mode.
ENTER
Moves cursor downward
during menu mode.
MENU button
Press to display
MENU
ADJUST
the Menu screen.
PICTURE ADJUST
POSITION / SIZE
AUDIO ADJUST
12
ASPECT button (Change to screen size.)
TV/VIDEO button (Change to input signal.)
VOLUME up/down
CHANNEL up/down
SLEEP button
Main Power On/Off Switch
TV/VIDEO button
The input mode changes
each time this button is
pressed. (See page 18)
POWER
R-TUNE
MENU
SET UP
PICTURE
AUDIO
TV/VIDEO DISPLAY
CH
VOL
MUTE
ENTER
ASPECT
RETURN SLEEP
RETURN button
DISPLAY button
The screen below is displayed for 3 seconds.
NORMAL CH12
STEREO
SAP
MONO
Changes to the next channel up
Changes to the next channel down
Increases volume
Reduces volume
MUTE button
Push this button to mute the sound.
(See page 24)
ASPECT button
Change of screen size (See page 19)
NORMAL
FULL
SLEEP button
The Wide LCD TV may be preset to
switch to stand-by after a fixed period.
The setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is
pressed.
30 60
0
When 3 minutes remain, "Off timer 3"
will flash. The off timer is cancelled if a
power interruption occurs.
Before the timer automatically turns the
power off, the remaining time will blink
on the screen ("3" for 3 minutes, "2"
for 2 minutes and "1" for 1 minute
before the power goes off).
JUST
ZOOM
90