Table of Contents
Advertisement
Chapter 7 Menu description tables
7-5-7 USER SW GAIN
Variable
Item
range
S.GAIN
2
30 dB
O
C U F R
36 dB
2
O
C U F R
DS.GAIN
2
6 dB:
O
C U F R
10 dB:
2
O
C U F R
12 dB:
2
O
C U F R
15 dB:
2
O
C U F R
20 dB:
2
O
C U F R
O When the DS.GAIN function is active, the shutter mode is
set to OFF.
The underlining in the variable range column indicates the setting in the preset
mode.
122
Downloaded From CamcorderManual.com Panasonic Manuals
Remarks
For selecting whether or not to enable a
setting of 30 dB for SUPER GAIN.
2 : The 30 dB setting is enabled.
O : The 30 dB setting is disabled.
For selecting whether or not to enable a
setting of 36 dB for SUPER GAIN.
2 : The 36 dB setting is enabled.
O : The 36 dB setting is disabled.
For selecting whether or not to enable a
setting increase of 6 dB for DS.GAIN.
(The pictures become 15 frames/second.)
2 : The 6 dB setting increase is enabled.
O : The 6 dB setting increase is disabled.
For selecting whether or not to enable a
setting increase of 10 dB for DS.GAIN.
(The pictures become 10 frames/second.)
2 : The 10 dB setting increase is enabled.
O : The 10 dB setting increase is disabled.
For selecting whether or not to enable a
setting increase of 12 dB for DS.GAIN.
(The pictures become 7.5 frames/second.)
2 : The 12 dB setting increase is enabled.
O : The 12 dB setting increase is disabled.
For selecting whether or not to enable a
setting increase of 15 dB for DS.GAIN.
(The pictures become 5 frames/second.)
2 : The 15 dB setting increase is enabled.
O : The 15 dB setting increase is disabled.
For selecting whether or not to enable a
setting increase of 20 dB for DS.GAIN.
(The pictures become 3 frames/second.)
2 : The 20 dB setting increase is enabled.
O : The 20 dB setting increase is disabled.
(continued)
7-5-8 LENS/IRIS
Variable
Item
range
A.IRIS LEVEL
000
:
045
:
100
C U F R
A.IRIS PEAK/AVE
000
:
030
:
100
C U F R
A.IRIS WINDOW
NORM1
NORM2
CENTR
C U F R
S.IRIS LEVEL
000
:
080
:
100
C U F R
IRIS GAIN
CAM
LENS
C U F R
IRIS GAIN VALUE
01
:
10
:
20
C U F R
Remarks
For setting the AUTO IRIS target value.
For determining the ratio of the peak to the
AUTO IRIS reference.
The higher the ratio, the greater the
response to the peak inside the iris detection
window; the lower the ratio, the greater the
response to the average value inside the iris
detection window.
For selecting the auto iris detection window.
NORM1: Window from the screen center
NORM2: Window from the bottom of the
screen
CENTR: Window in the shape of a spot at
the screen center
For setting the target value of the SUPER
IRIS (backlight compensation function).
For selecting whether the IRIS GAIN
adjustment is executed by the camera or the
lens.
<Note>
For a lens with an extender (k2, k0.8 etc.)
that was manufactured before the DIGI
POWER type lens from Fujinon, the IRIS
control on the unit will not operate properly
when set to the CAM, since IRIS correction
control is operated on the lens if the
extender is inserted.
For setting the IRIS GAIN adjustment value.
The setting takes effect when IRIS GAIN has
been set to CAM.
Advertisement
Table of Contents
