Assembling The Pedestal - Panasonic TC TC-P58S1 Operating Instructions Manual

■

Assembling the pedestal

[TC-P58S1 (TBLX0102)]
Fix securely with assembly screws
(Total 4 screws)
Tighten screws firmly.
Pole
R
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
B
Arrow
mark
Pole
(Image: TC-P58S1)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury
may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury
may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result.
Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Attaching the pedestal to TV
[TC-P65S1 (TBLX0126)]
A . Fix securely with assembly screws
(Total 6 screws)
Tighten screws firmly using
Allen wrench
A
Pole
L Pole
Front
Base
Bottom view
Rear side
Hole for pedestal
installation
Pole
Fix securely with assembly
screws
Base
Assembly screws
A .
C
A
C
Pole
Front
Poles (2)
Base
(for 58")
(for 65")
Base (1)
(for 58")
. (Total 4 screws)
B
(for 65")
Allen wrench
(included tool only for 65")
Accessories
A
(for 58")
M5 × 25 (Silver) (4)
(for 65")
M5 × 30 (Silver) (6)
B
(for 58")
M5 × 30 (Black) (4)
(for 65")
M6 × 25 (Black) (4)
L
R
or is printed at the
L R
bottom of the poles.
Back
Front
C
9