Application > P-Series Setup - Printronix T6000 Administrator's Manual

Application > P-SERIES Setup
IMPORTANT
The P-SERIES Setup submenu will only be present when the LP+ Emulation
menu is set to P-SERIES. Otherwise, this menu will be replaced with the LP+
Emulation menu.
Application > P-Series Setup > Character Group
This option selects the Character Set Group. Based on the group selected,
then the character set can be chosen with the menu following XXX Sets. The
group Standard Sets is shown below because it is unique to P-Series. All
other groups are similar and described in LP+, PGL, VGL Character Sets.
This option will show when menu Character Group is set to Standard Sets.
Note that depending on which value is chosen, other menu(s) can be
unhidden. For example, when IBM PC is selected, a menu Primary Subset
and Extended Subset is available as shown in this table.
IBM PC
Multinational
ECMA Latin 1
DEC Mult
CP 858 EURO
Factory Default
IMPORTANT
Application > P-Series Setup > Character Set
When selected, Primary Subset and Extended Subset
menus will be unhidden.
When selected, the Multinational menu will be
unhidden.
When selected, Primary Subset and Extended Subset
menus will be unhidden.
When selected, the DEC Mult. menu will be unhidden.
No other menus will be unhidden.
IBM PC
Upon different choices, menus may be unhidden
as described.
145