Samsung BD-D5500 User Manual page 75

BLU-RAY DISC PLAYER
Quick Setup Guide
BD-D5500
Connecting to a TV
Connectin to a TV with an HDMI Cable - Best Quali
Recommended
1.
Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMIIN terminal of your lV.
2.
Turn on the player and lV.
3.
Press the input selector on your lV remote control until the HDMI signal from the player appears on your lV screen.
_lit""....
!.!.
A
HOM! cable
(not included)
TV
HDMIIN
~
NOTE
• An HOMI cable outputs digital video/audio, so you don't need to connect an audio cable.
• If the player is connected to your lV in the HOMI nop, 1080i, or 1080p output mode, you must use a High speed (category 2)
HOMI cable.
• HOMI outputs only a pure digital signal to the 1V.
If your lV does not support HOCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
• Depending on your lV, certain HOMI output resolutions may not work. Please refer to the user manual of your lV.
• When you connect the player to the lV using the HOMI cable for the first time or to a new lV, the HOMI output resolution will be
automatically set to the highest supported by the lV.
• You must have an HOMI connection to enjoy videos with 3D technology.
• A long HOMI cable may cause a screen noise. If this occurs, set Deep Color to Off in the menu.
0-
English