Case 2 : Connecting To An Audio System (Av Receiver With Dolby Digital Or Dts Decoder) - Better Quality; Case 3 : Connecting To An Audio System (2 Channel Amplifier) - Good Quality - Samsung BD-D5500 User Manual

Case 2 : Connecting to an Audio
System (AV receiver with Dolby
Digital or DTS decoder) - Better
Quality
1. Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the
rear of the player to the DIGITAL AUDIO IN
(OPTICAL) terminal of your AV receiver.
2. Using the video signal cable(s), connect
the HDMI, COMPONENT, or VIDEO OUT
terminals on the rear of the player to the
HDMI, COMPONENT, or VIDEO IN terminal
of your 1V. (See pages 20-23)
3. Turn on the player, 1V, and AV receiver.
4. Press the input select button of the AV receiver
to select the external input and hear sound from
the player. Refer to your AV receiver's user
manual to set the AV receiver's audio input.
5. Press the input selector on your 1V remote
control to select the video source (HOMI,
Component, or Video.)
Case 3 : Connecting to an Audio
System (2 Channel Amplifier)
- Good Quality
1. Using the audio cables, connect the AUDIO
OUT (red and white) terminals on the rear of
the player to the AUDIO IN (red and white)
terminals of your 2 Channel Amplifier.
2. Using the video signal cable(s), connect
the HDMI, COMPONENT, or VIDEO OUT
terminals on the rear of the player to the
HDMI, COMPONENT, or VIDEO IN terminal
of your 1V. (See pages 20-23)
3. Turn on the player, 1V and 2 Channel Amplifier.
4. Press the input select button of the 2 Channel
Amplifier to select the external input in order
to hear sound from the player, Refer to your 2
Channel Amplifier's user manual to set the 2
Channel Amplifier's audio input.
5. Press the input selector on your 1V remote
control to select the video source (HOMI,
Component, or Video.)
~
NOTE
• If you use the Digital Audio connection described in Case 2, you will hear discs with PCM audio soundtracks only
through the front two speakers,
English
25