KENWOOD CORPORATION
FCC ID: ALH36413110/ALH36423110
Installing the Cap over the Speaker/Microphone Jacks
If you are not using an optional speaker/ microphone, install the cap over the SP/MIC jacks using the supplied screw.
Note:
To keep the transceiver water resistant, you must cover the SP/MIC jacks with the cap or the cap or the
speaker/microphone connector.
Installing the Optional Speaker/ Microphone
1 Insert the guide of the speaker/ microphone plugs into the SP/MIC jacks.
2 Install the speaker/microphone locking Hardware Fixture over the plugs using the supplied screw.