Table of Contents
Advertisement
Contents
Connections
Resetting network settings
Perform this procedure if network contents do not playback correctly or the network cannot be connected correctly.
Network settings are reset to the factory default values. Make settings again.
However, the menu "Amp Assign", "Speaker Config." and "Video" settings are not reset.
X
Front panel
Display
Playback
ENTER
BACK
303
Rear panel
Settings
1
Press X to turn on power to the unit.
2
Press ONLINE MUSIC on the remote control unit.
3
Press and hold the main unit's BACK and ENTER at the
same time for at least 3 seconds.
4
Remove your fingers from the two buttons when
"Network Reset..." appears on the display.
5
"Completed" is shown in the display when reset is
complete.
NOTE
0 Do not turn the power off until reset is complete.
Remote
Tips
Appendix
Index
Advertisement
Table of Contents
