Table of Contents
Advertisement
Contents
Connections
Levels
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
o Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0 The set "Levels" are reflected in all sound modes.
0 If you wish to adjust the channel level for each input source, carry out the
settings in "Channel Level Adjust". (v p. 140)
0 When headphones are connected to the PHONES connector on this unit, you
cannot set "Levels".
o Set Defaults
The "Levels" settings are returned to the default settings.
Front panel
Display
Playback
Settings
240
Rear panel
Tips
Remote
Index
Appendix
Advertisement
Table of Contents
