Listening To An Hd Radio Station - Marantz SR7011 Owner's Manual

Contents Connections

Listening to an HD Radio station

1
Connect the antenna. ("Connecting an HD Radio
antenna" (v p. 88))
2
Press TUNER to switch the input source to "HD Radio".
G TV screen H
HD Radio
CH 1
Tune
G Display of this unit H
3
Press OPTION.
The option menu screen is displayed.
4
Use ui to select "FM/AM", then press ENTER.
This displays the reception band input screen.
Front panel Display
Playback
STEREO HD-AUTO
Now Playing
FM 92.10MHz
Preset Option
OPTION OPTION
Rear panel
Settings
5
Use o p to select "FM" or "AM", then press ENTER.
FM:
AM:
6
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
0 The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in
using buttons to change the frequency. The default setting is "Auto". You can also
use "Direct Tune" to tune in by entering the frequency directly.
0 In "Auto" mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the "Manual" mode or "Direct Tune" mode to tune in.
Operation buttons
TUNE +, –
CH/PAGE d f
u i
o p
0 – 9
109
Remote
Tips Appendix
When listening to an FM broadcast.
When listening to an AM broadcast.
Function
Selects the radio station (up/down)
Selects preset radio stations
Selects the radio station (up/down)
Selects preset radio stations
Preset channel selection /
Direct frequency tuning
Index