Configuration; Registering Gigaset M105 Data At Gigaset 3070Isdn/3075Isdn - Siemens M105 Operating Instructions Manual



Configuration

Registering Gigaset M105 Data at Gigaset 3070isdn/
3075isdn
The purpose of configuration is to register the Gigaset M105 Data unit at
a Gigaset 3070/3075isdn base station, at a second Gigaset M105 Data
or at a Gigaset M101 Data. You can only perform configuration with the
configuration program.
Proceed as follows:
1. Install Gigaset M105 Data.
2. Switch Gigaset 3070/3075isdn to registration mode (press LED).
3. Start the Gigaset M105 Data configuration program.
4. Select the Local adapter
5. Click the Register
6. Find a registration location and click OK. The registration procedure
starts and the message
the local adapter logs on. Check that the base is ready for registra-
tion." appears on the screen.
The two devices are automatically synchronised. There is now one entry
in the Registered bases
7. Close the program with OK.
In the event of errors or for more information, see
gram options" on page 10
A
tab.
button and enter the base station PIN.
"If the required base is ready for registration,
list.
.
Back
Configuration
"Configuration pro-
7