Sharp MX-6500N Media Manual page 34

PAPER CAPACITy - TRIMMING UNIT
MX-TM10 Trimming Unit (For MX-FN22 Finisher)
MODeL
Type
Acceptable number of sheets
Cutter Capacity (waste)
PAPER CAPACITy - INSERTER UNIT
MX-CF11 2-Tray inserter
MODeL
Type
Paper capacity
Paper weight (feeding section)
Paper weight (through pass)
Paper size (paper feeding section)
Recommended PaPeR SuPPoRted PaPeR tyPeS
Sharp MX-6500N/7500N Media Guide
2-20 sheets (60-81.4 g/m
Plain Paper
Coated Paper
Upper tray: 200 sheets; Lower tray: 200 sheets (80 g/m
AB (Auto): 11" x 17", 8.5" x 14", 8.5" x 13.5", 8.5" x 13.4", 8.5" x 13", 8.5" x 11"
Inch (Auto): 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 13.5", 8.5" x 13.4", 8.5" x 11", 8.5" x 11R",
Custom: Main scanning direction (width): 140-320 (5.5"-12.5");
Sub scanning direction (length): 140-470 (5.5"-18.5");
Note: 5.5" x 8.5" is only available for feeding into the feeding section of the inserter.
The following paper sizes are excluded: Auto Inch: 8.5" x 13.4", 8.5" x 13.5", 8.5" x 14", 8.5" x 11R";
SuPPoRted PaPeR SizeS
© 2015 Sharp Electronics Corporation. All rights reserved.
MX-TM10
Trimming Unit
); 2-10 sheets (more than 81.4-105 g/m
2
(more than 105-209 g/m ); (1 sheet of cover of 300 g/m
2
2-10 sheets (80-105 g/m
2-3 sheets (more than 105-209 g/m
1,500 sheets (80 g/m paper; Trim width: 20mm)
2
MX-CF11
Two Tray Inserter
60-220 g/m
55-300 g/m
7.25" x 10.5R", 5.5" x 8.5R"
Auto AB: 8.5" x 13", 8.5" x 13.4", 8.5" x 13.5"
thRoughPut SPeedS
or less is included)
2
)
2
)
2
)
2
2
2
PaPeR caPacitieS conveRSion chaRtS
); 2-3 sheets
2
3 4