Table of Contents
Advertisement
Incoming Messages (KX-FP155 only)
Listening to recorded
When the unit has recorded new voice messages:
— the MESSAGE indicator will flash,
— the call counter will show the total number of recorded messages, and
— slow beeps will sound if the message alert feature is activated (feature #42 on page 66).
Example:
Press LM.
Only the new recorded messages will be
played.
Adjust the speaker volume using + or
-.
After playing back all of the new messages,
the MESSAGE indicator will stop flashing
but will remain lit up.
If you press LM at this
time, all the recorded messages will be
played.
To repeat a message
Press ( while listening to the message.
If you press ( within 5 seconds of the
beginning of the message, the previous
message will be played.
To play back a specific message, press ( or
) and search for the message you want to
listen to.
To skip a message
Press ) to play the next message.
To stop playback
Press {.
If you press LM within 1 minute,
the unit will resume playing the rest of the
messages.
Voice time/day stamp
During playback, a synthesized voice will
announce the time and day of the week that each
message was recorded.
52
messages!
02
PLAY MESSAGES
Call counter
SLOW
MESSAGE
FLASH/LIGHT
To change the playback speed
Press } to play messages at one and a half
times the original speed.
Press x to play messages at half the
original speed.
To return to the original speed, press } or
x again during quick or slow playback.
To erase a specific message
Press h while listening to the message you
want to erase.
To erase all the messages
Check that you have listened to all of the recorded
messages.
1. Press h.
2. Press w
3. Press w.
Messages recorded in voice mailbox will not be
erased.
ERASE
QUICK
SET
ALL MESSAGES
Display:
.
ERASE MESSAGES?
YES:SET/NO:STOP
STOP
PRESS SET
Advertisement
Table of Contents
