Programming!
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 62–71).
General programming method
Press p.
1
Display:
2
Select the feature you wish to program.
For basic features (p. 62, 63):
Press ( or ) until the desired
feature is displayed.
For advanced features (p. 64–71):
Press ( or ) until the following is
displayed:
then press w and press ( or ) until
the desired feature is displayed.
The current setting of the feature will be
displayed.
Press + or - until the desired setting
3
is displayed.
This step may be slightly different
depending on the feature.
Press w.
4
The setting you selected is set, and the
next feature will be displayed.
To exit programming, press p.
5
Programming by entering the program code
number directly
You can select a feature by directly entering the program
code (# and 2-digit number) instead of using ( or )
in step 2.
1. Press p
.
2. Press # and the 2-digit code number.
3. Follow steps 3 to 5 above.
See programming tables for code numbers (p. 62–71).
To cancel programming
Press p to exit the program.
SYSTEM SET UP
I H
PRESS NAVI.[
]
ADVANCED MODE
PRESS SET
Features Summary
MENU
SET
61