Table of Contents
Advertisement
Features Summary
Programming
Programmable Features
The unit provides various programming features. Program the desired settings by referring to the
programming tables (page 63, 65).
General programming method
1
{ MENU } .
Press
2
Select the feature you wish to program.
For basic features (page 63):
{<} or {>} until the desired feature
Press
is displayed.
For advanced features (page 65):
{<} or {>} until the following is
Press
displayed:
{ SET } and press {<} or {>}
then press
until the desired feature is displayed.
L The current setting of the feature will be
displayed.
3
{+} or {-} until the desired setting
Press
is displayed.
L This step may be slightly different
depending on the feature.
4
{ SET } .
Press
L The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press
- 62 -
{+} {MENU}
{<}
{-}
{>} {SET}
SYSTEM SET UP
( ) ]
PRESS NAVI.[
ADVANCED MODE
PRESS SET
{ MENU } .
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
{<} or {>} in step 2.
using
{ MENU } .
1. Press
{#} and the 2-digit code number.
2. Press
3. Follow steps 3 to 5 in "General programming
method".
L See programming tables for code numbers
(page 63, 65).
To cancel programming
{ MENU } to exit the program.
Press
Advertisement
Table of Contents
