Table of Contents
Advertisement
Toner cartridge and drum unit
Caution:
L Read the instructions below before you begin installation. After you have read them, open the
drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light
may damage the drum. Once you have opened the protection bag:
– Do not expose the drum unit to light for more than 5 minutes.
– Do not touch or scratch the green drum surface.
– Do not place the drum unit near dust or dirt, or in a high humidity area.
– Do not expose the drum unit to direct sunlight.
L Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the
toner life.
1
Before opening the protection bag of the
new toner cartridge, shake it vertically more
than 5 times.
2
Remove the toner cartridge and drum unit
from the protection bags. Peel off the seal
from the toner cartridge (1). Remove the
protection bar from the drum unit (2).
1
3
With "Panasonic" face up on the toner
cartridge, match the red arrows on the
cartridge and the drum unit.
Hold here.
Red arrows
Drum unit
2
Toner
cartridge
Green drum
surface
4
Slide the tab on the toner cartridge into the
slot of the drum unit.
5
Firmly press down on the right side of the
toner cartridge to snap into position.
6
Turn the two levers on the toner cartridge
with firm pressure.
Setup
Levers
- 13 -
Advertisement
Table of Contents
