Setup
Recording paper
A4, letter or legal size recording paper can be used for fax messages. The unit can hold up to 150 sheets
2
of 60–75 g/m
paper or 120 sheets of 90 g/m
L The unit is set for A4 size paper by default. If you want to use letter or legal size paper, change the
setting (feature #16 on page 64).
1
Pinch the right side of the recording paper
guides, then slide it open to its full width.
2
Fan the stack of paper to prevent a paper
jam. Insert the paper into the recording
paper entrance.
Recording
paper
entrance
L The paper should not be over the tab.
- 16 -
2
paper. See the note for paper specifications on page 86.
Side to be printed
face down
L If the paper is not inserted correctly,
readjust the paper, or the paper may
jam.
3
Adjust the width of the guides to the size of
the recording paper by sliding the right side
of the guides.
Adding paper
1. Remove all of the paper.
2. Add paper to the stack of paper you removed
and straighten.
3. Follow steps of the recording paper
installation.