Table of Contents
Advertisement
Sending Faxes
6
{ SET } .
Press
7
{ SET } .
Press
Example:
L To erase other entries, repeat steps 5 to
7.
8
{ STOP } to exit the program.
Press
Sending the same document
to pre-programmed parties
{BROADCAST}
{-}
{MANUAL BROAD}
1
Insert the document FACE DOWN into the
feeder.
L Confirm that there are no documents
on the scanner glass.
L If necessary, press { RESOLUTION }
repeatedly to select the desired setting
(page 32).
- 40 -
DELETE OK?
YES:SET/NO:STOP
DELETED
u
Bob
0123456
{+}
{>}
{STOP}
{SCAN}
{RESOLUTION}
{FAX START}
{SET}
2
Press the desired
{ MANUAL BROAD } .
L You can also use the navigator key.
{>} , then press {+} or {-} until
Press
the desired key name is displayed, and
{ FAX START } .
press
Example:
L The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
L After transmission, the stored document
will be erased automatically, and the
unit will automatically print a broadcast
sending report.
Note:
L Do not open the document cover when
sending a fax with the auto document feeder.
L If you select the "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages
that the unit can transmit will decrease.
L If the document exceeds the memory
capacity (page 85), sending will be cancelled.
L If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialled up to 5 times after all of the
other entries have been called.
To send the same document using the
scanner glass
L Confirm that there are no documents in
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
{ BROADCAST } (1-2) or
3. Press the desired
{ MANUAL BROAD } .
L To send a single page, skip to step 6.
L To send multiple pages, go to the next
step.
4. Place the next page.
{ SCAN } .
5. Press
L To send more pages, repeat steps 4 and
5.
{ FAX START } .
6. Press
{ BROADCAST } (1-2) or
<BROADCAST1>
EDIT:PRESS MENU
b
<BROADCAST1>
SEND:PRESS SET
Advertisement
Table of Contents
