I DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (1), 4 screws (2) and 1 screw (3).
(Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)
4
Front Panel Unit
Top Cover
2
CB653
CB431
4
2. Removal of Front Panel Unit
a. Loosen the harness fixture fixing the cable.
b. Remove CB431, CB653 and CB804. (Fig. 1)
c. Remove 6 screws (4). (Fig. 1)
d. Release a hook on the right side of the Front Panel
Unit, then remove the Front Panel Unit forward. (Fig. 1)
3
CB804
4
Hook
Fig. 1
RX-V359/HTR-5930
1
2
13