Setting Up The Password; Changing The Memory Security Password; Turning Memory Security On/Off - Brother MFC-8370DN User Manual

Hide thumbs Also See for MFC-8370DN:
Table of Contents

Advertisement

Chapter 4

Setting up the password

Note
• If you have already set the password, you
will not need to set it, again.
• If you forget the Memory Security
password, please call your Brother dealer.
a
Press Menu, 1, 8, 1.
b
Enter a four-digit number for the
password using number 0-9.
Press OK.
c
If the LCD shows Verify:, re-enter the
new password.
Press OK.
d
Press Stop/Exit.
Changing the Memory
Security password
a
Press Menu, 1, 8, 1.
b
Press a or b to choose Set Password
Press OK.
c
Enter your four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
If the LCD shows Verify:, re-enter the
new password.
Press OK.
f
Press Stop/Exit.
32
Downloaded from ManualsPrinter.com Manuals
Turning Memory Security
4
on/off
If you enter the wrong password, when
following the instruction below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Memory Security on
a
Press Menu, 1, 8, 1.
b
Press a or b to choose Set Security.
Press OK.
c
Enter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
Note
If there is a power failure the data will stay
in memory for up to 4 days.
4
Turning Memory Security off
a
Press Menu.
Enter the registered four-digit password.
Press OK.
b
Memory Security is automatically turned
off and the LCD shows the date and
time.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in Secure
Mode until the registered password is
entered.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-8380dn

Table of Contents