Advertisement
Switching Spectrum Analyzer Display
This function permits switching of the spectrum analyzer
d i s p l a y .
Switching the Spectrum Analyzer Display:
Each time you press the CLK button for at least one second,
the display switches as follows:
NOTE
This function cannot be operated while the Black Mask function is
o n .
Dimmer
You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire
is not connected.
Turning Dimmer On/Off:
1
Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
2
Keep pressing the
button until the Dimmer function
appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Dimmer ON" or "Dimmer
OFF" in the display, indicated that the current dimmer setting is
on or off.
3
Switching settings
Press either the AM button or FM button .
The display and setting will change.
4
Press the MENU button to end the menu mode.
Non-fading preout
Turning non-fading output On/Off :
Press the NF button for at least one second to set the function
ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
— 27 —
Advertisement
