Philips VAE8015 Service Manual page 10

EN 10 5. VAE8015 / 8020
Ref. # Function name
638 DS_BE_GetSelfTest
Result
639 DS_BE_RadialInit
640 DS_BE_GetOPUInfo It retrieves the OPU number
641 DS_BE_WriteReadPl
usR
642 DS_BE_WriteReadPl
usREndlessLoop
643 DS_BE_ReadTOC
644 DS_BE_GetDiscInfo
645 DS_BE_DiscErase
Menu Mode Interface (only for Digiboard Empress)
Activation
Connect the recorder to the mains. The following text will
appear on the screen of the terminal (program):
DVD Video Recorer Diagnostic Software version 48
Basic SDRAM Data bus test passed
Basic SDRAM Address bus test passed
Basic SDRAM Device test passed
(M) enu, (C) ommand or (S) 2B-interface?
Main Menu
1. Digital Board
2. Analogue Board
3. Front Panel
4. Basic Engine
5. DVIO
6. Progressive Scan Board
7. Loop tests
8. Log
9. Scripts
Select>
Figure 5-4 Opening screen for Menu Mode
The first line indicates that the Diagnostic software has been
activated and contains the version number. The next lines are
the successful result of the SDRAM interconnection test and
the basic SDRAM test. The last line allows the user to choose
between the three possible interface forms.
Service Modes, Error Codes and Fault Finding
Description
It retrieves the result of the
Self Test of the Basic engine,
which is executed during
power-on.
It allows the radial initialisa-
tion
from the EEPROM of the Ba-
sic engine.
It writes data to the BE which
is stored on a DVD disc and
read it back from the DVD
disc. This is only done when
the result of the self-test con-
tains no errors.
It writes data to the BE which
is stored on a DVD disc and
read it back from the DVD
disc, while repeating in an
endless loop. This is only
done when the result of the
self-test contains no errors.
Errors are stored in NVRAM.
Read TOC Information
This nucleus reads the TOC
information of a disc.
Get Disc Information
This nucleus reads from the
TOC-info the disc type. If the
disc is a DVD+RW or a
DVD+R disc, also the ADIP-
info will be read to get the
disc manufacturer id and the
media type id of that disc.
Disc Erase
This nucleus erases a
DVD+RW disc. This disc will
be recognized as an empty
disc by the application.
[M] : @ M
->
->
->
->
->
->
->
->
->
CL 16532095_074.eps
150801
If pressing 'M' has made a choice for Menu Interface, the Main
Menu will appear.
Menu Structure
1. Digital Board
2. Analogue Board
3. Front Panel
4. Basic Engine
1. Reset
2. S2B Pass-through
3. S2B Echo
4. Focus On
5. Focus Off
6. Version
7. Self Test
8. Get Self Test Result
9. Basic Engine Test
10. Laser Test
11. Focus Test
12. Tilt Test
13. Optimise Jitter
14. Statistics Info
15. Log
1. Read Error Log
2. Reset Error LogSpindle Motor
16. Spindle Motor
1. Spindle Motor On
2. Spindle Motor Off
3. Spindle Motor Test
17. Radial
1. Radial On
2. Radial Off
3. Radial Initialisation
4. Radial ATLS Calibration
18. Sledge
1. Sledge test
2. Sledge test slow
19. Tray
1. Tray In
2. Tray Out
5. DVIO
6. Progressive Scan Board
7. Loop Tests
8. Log
9. Scripts