Advertisement
Cutting
Overall hair cutting
procedure
*Cutting areas with excessive hair.
Having secured the hair clipper attachment
Make sure the switch is facing upwards and cut by
moving the trimmer downwards.
Move the trimmer down-
wards in the direction of
the arrows when cutting
around the ears.
Selecting the thickness of the finish
Short finish
7mm
(1/4")
(Finishing thickness of
approximately 7mm)
(Approx. 1/4")
approx. 7mm (1/4")
Finish adjustment switch
Long finish
9mm
(3/8")
(Finishing thickness of
approximately 9mm)
(Approx. 3/8")
approx. 9mm (3/8")
13
Guard
Scalp
The guard section of the hair clipper attachment will prevent the
blade from cutting an excessive amount of hair.
* Do not use the trimmer for the areas listed below.
Do not move the trimmer
against the direction in
which the hair lays.
Scalp
Apply the comb directly
to the scalp and move it
slowly.
On short hair and hair
with a tendency to stand
up, such as cropped
hair (tufting hair).
On scarce or thin areas.
On the crown.
14
Advertisement
