Advertisement
Cutting
procedure
1
Cutting the sides to the back
Cut from
Make sure the switch is facing downwards
and cut by moving the trimmer upwards.
25 - 20mm
(15/16 - 13/16")
2
Cutting around the ears
Make sure the switch is facing downwards
Hold down
and cut by moving the trimmer upwards.
the ears with
your fingers
Trimming height
25 to 20mm
(15/16 to 13/16")
Bring the trimmer
gently away from
the hair to finish.
Trimming height
15 to 10mm
(9/16 to 3/8")
Cut a little, and then
gently separate the
trimmer from the hair.
11
3
Cutting the nape of the neck
Slowly and carefully cut
a little at a time.
4
Cutting between the sides and back
Cut between the already
cut sides and back bit by
bit with the use of the
hair clipper attachment.
Make sure the switch is facing
upwards and cut by moving the
trimmer downwards.
Trimming height
10 to 5mm
(3/8 to 3/16")
Make sure the switch is facing downwards
and cut by moving the trimmer upwards.
Bring the trimmer
gently away from
the hair to finish.
12
Advertisement
