Common Procedures; Clock Settings - Panasonic Diga DMR-ES10 Operating Instructions Manual

Changing the unit's settings
Numbered
buttons
SETUP

Common procedures

Preparation
•
The settings remain intact even if you switch the unit to standby.
•
Turn on the television and select the appropriate video input to suit
the connections to this unit.
•
Turn the unit on.
1
While stopped
Press [SETUP].
Tabs
SETUP
Channel
Setup
2
Press [e, r] to select the tab and
press [q].
3
Press [e, r] to select the menu and
press [ENTER].
4
Press [e, r] to select the option and
press [ENTER].
Note
There may be differences in operation methods. If this happens,
follow the on-screen instructions for the operation.

Clock settings

In the case of a power failure, the clock setting remains in memory
for approximately 1 minute.
1
While stopped
Press [SETUP].
2
Press [e, r] to select "Setup" and
press [q].
3
Press [e, r] to select "Clock
Settings" and press [ENTER].
Set Clock Automatically
4
Press [e, r] to select "Set Clock
Automatically" and press [ENTER].
5
Press [ENTER].
Auto setting starts. This can take some time, up to a few hours
in some cases. The following screen appears when setting is
RQT8009
complete.
34
AUDIO
CANCEL VCR Plus+
CM SKIP
SKIP SLOW/SEARCH
DIRECT NAVIGATOR FUNCTIONS
TOP MENU
e, r, w, q
ENTER
SUB MENU RETURN
RETURN
SCHEDULE
DISPLAY STATUS TIME SLIP
REC REC MODE ERASE ADD/DLT
CREATE
OPEN/CLOSE SETUP F Rec
CHAPTER
Menus Options
Signal Source (RF IN) CableTV
Set Channels Automatically
Channel Captions
Preset Channel Captions
M l Ch l C ti
Set Clock Automatically
SETUP
Auto Clock Setting is complete.
Channel
Setup
4/4/2002 12:15 AM
Disc
DST............. On
Time Zone.... CST
Video
Audio
•
If the time was not set correctly, use manual clock setting or time
zone adjust.
•
DST, Daylight Saving Time, shows the summertime setting.
•
Time Zone shows the time difference from Greenwich Mean Time
(GMT).
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time)
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
For other areas: xx hr
6
Press [ENTER].
To cancel partway
Press [RETURN].
Adjust Time Zone
Adjust the time zone (–1 or +1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
4
Press [e, r] to select "Adjust Time
Zone" and press [ENTER].
Adjust Time Zone
SETUP
Channel
Setup
Disc
Video
5
Press [e, r] to select "–1" or "+1" and
press [ENTER].
Set Clock Manually
4
Press [e, r] to select "Set Clock
Manually" and press [ENTER].
Set Clock Manually
SETUP
Month Day Year
1 / 1 2000
Channel /
Setup
Disc
Video
5
Press [w, q] to select the item you
want to change and press [e, r] to
change the setting.
DST (Daylight Saving Time): On or Off
If you select "On", the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on
the last Sunday in October.
Time Zone (➔ above)
6
Press [ENTER].
The clock starts.
When you change the time zone, the recording times for titles
recorded before the time zone was changed also change to
correspond to the new time zone.
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
= GMT –6
= GMT –8
= GMT –9
= GMT –10
1
0
1
Hour Minute
12 : 00
SAT AM
DST Time Zone
Off EST