Changing The Unit's Settings; Summary Of Settings - Panasonic Diga DMR-ES10 Operating Instructions Manual

Changing the unit's settings

Summary of settings

See page 34 for details on menu operation.
The settings remain intact even if you switch the unit to standby.
Tabs
Signal Source (RF IN) (➔ page 11)
Channel
Set Channels Automatically (➔ page 11)
Preset Channel Captions (➔ page 13)
Manual Channel Captions (➔ page 13)
VCR Plus+ Ch. Settings (➔ page 12)
Off Timer
Setup
Select how long the unit remains on when it is not being used.
Remote Control Code (➔ page 14)
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically (➔ page 34)
Set Clock Manually (➔ page 34)
Adjust Time Zone (➔ page 34)
Quick Start
A few seconds after turning on the unit, you can start recording to
DVD-RAM.
Power consumption is also higher when the unit is turned off if
this is set to "On".
Restore Default Settings
This returns all values in the SETUP menus, except for the clock,
channel settings, ratings level, and on-screen language, to the
default settings.
Settings for Playback
Disc
Press [ENTER] to show the following settings.
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit password
with the numbered buttons when the password screen is
shown.
•
Do not forget your password.
Play DVD-Audio in Video Mode
Select "Video Mode (Video On)" to play DVD-Video content
on some DVD-Audio.
Audio Language
Subtitle Language
Menu Language
Settings for Recording
Press [ENTER] to show the following setting.
Recording Time in EP Mode
Select the maximum number of hours for recording in EP
mode (➔ page 15, Recording modes and approximate
recording times).
Video Still Mode
Select the type of picture shown when you pause play
(➔ page 36, Frames and fields).
Continued on next page
RQT8009
32
Menus
•
Some discs start in a certain
DVD-V
language despite any
changes you make here.
•
Enter a code (➔ page 36)
DVD-V
with the numbered buttons
when you select
"Other ".
When the selected language
is not available on the disc,
the default language is
DVD-V
played. There are discs
where you can only switch
the language from the menu
screen.
Options (Underlined items are the factory presets.)
• •
Antenna CableTV
–
–
–
–
• •
2 Hours 6 Hours
• •
Set Code 1 Set Code 2
• •
–1 0
• •
On Off
• •
Yes No
•
8 No Limit: All DVD-Video can be played.
•
1 to 7: Prohibits play of DVD-Video with corresponding
ratings recorded on them.
•
0 Lock All: Prohibits play of all DVD-Video.
• •
Unlock Recorder Change Password
• •
Change Level Temporary Unlock
•
Video Mode (Video On):
The setting returns to "Audio Mode (Video Off)" when
you change the disc or turn the unit off.
•
Audio Mode (Video Off)
• • •
English French Spanish
•
Original: The original language of each disc will be selected.
•
Other
•
Automatic:
If the language selected for "Audio Language" is not available,
subtitles of that language will automatically appear if available on
that disc.
• • •
English French Spanish
• • •
English French Spanish
•
EP–Extended Play (6H):
You can record for 6 hours on an unused 4.7 GB disc.
•
EP–Extended Play (8H):
You can record for 8 hours on an unused 4.7 GB disc.
•
Automatic
•
Field: Select if jittering occurs when "Automatic" is selected.
•
Frame: Select if small text or fine patterns cannot be seen clearly
when "Automatic" is selected.
•
Off
•
Set Code 3
•
+1
•
Other
•
Other