Video Menu-Change Picture Quality; Audio Menu-Change Sound Effect; Other Menu-Change The Display Position; Functions Window And Status Messages - Panasonic Diga DMR-ES10 Operating Instructions Manual

Video menu–Change picture quality
Picture
RAM -R -RW(V) +R
DVD-V
To select the picture mode during play
•
Normal: Default setting
•
Soft: Soft picture with fewer video artifacts
•
Fine: Details are sharper
•
Cinema: Mellows movies, enhances detail in dark scenes.
MPEG-DNR
RAM -R -RW(V)
Reduces noise and picture degradation.
On←→Off
Progressive (➔ page 36)
Select "On" to enable progressive output.
•
Select "Off" if the picture is stretched horizontally.
•
When progressive output is on, closed captions cannot be
displayed.
Transfer (When "Progressive" is set to "On".)
Select the method of conversion for progressive output to suit
the type of material being played (➔ page 36, Film and video).
•
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
•
Auto2: Compatible with 30 frame-per-second film content in
addition to 24 frame-per-second film content.
•
Video: Select when using Auto1 and Auto2, and the video
content is distorted.
Line-in NR (Only when IN1, IN2 or IN3 is selected.)
Reduces video tape noise while dubbing.
Depending on the software, jittering may occur.
•
Automatic:
Noise reduction only works on picture input from a
video tape.
•
On: Noise reduction works for any video input.
•
Off: Noise reduction is off. Select when you want to record
input as is.
Only when you have selected "480p" in "TV Type" (➔ page 14).
Audio menu–Change sound effect
V.S.S.
RAM -R -RW(V) +R
DVD-V
(Dolby Digital, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
•
Turn V.S.S. off if it causes distortion.
•
V.S.S. does not work for SAP recordings.
Dialog Enhancer
RAM -RW(V)
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog
easier to hear.
Other menu–Change the display
position
Position
1 (Standard) - 5: The higher the setting the lower the screen moves.
DVD-A -RW(VR)
+R DVD-V DVD-A -RW(VR)
DVD-A -RW(VR)
+R DVD-V DVD-A -RW(VR)
FUNCTIONS window and

Status messages

FUNCTIONS window

By using the FUNCTIONS window you may access the main
functions quickly and easily.
1
While stopped
Press [FUNCTIONS].
FUNCTIONS DVD Off DOCUMENTARY
DVD-RAM Cartridge Protection Off
Disc Protection Off
Playback DIRECT NAVIGATOR
Schedule SCHEDULE
VCR Plus+
Other Functions
ENTER
Functions displayed depend on the type of disc.
2
Press [e, r] to select an item and
press [ENTER].
•
If you select "Other Functions", press [e, r] to select an
item and press [ENTER].
To exit the FUNCTIONS window
Press [FUNCTIONS].
Status messages
Status messages appear on the television during operation to show
the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
DVD-RAM
Rec.
Play
Stereo
Date and time
12/24 6:34 PM
g T12 0:01.23 SP
Title number and elapsed
time during play/
Recording mode
No display
Type of disc
Recording or play status/input
channel
Audio type
Available recording time
and recording mode
g Remain 1:45 SP
T12 0:12.34 SP
g
Title number and elapsed
time during recording/
Recording mode
RQT8009
25