Tuning - Panasonic Diga DMR-EH575 Operating Instructions Manual

Tuning

1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "To Others"
and press [OK].
3
Press [3, 4] to select "Setup" and
press [OK].
4
Press [3, 4] to select "Tuning" and
press [1].
Setup
Manual Tuning
Auto-Setup Restart
Download from TV
Tuning
Disc
Picture
Sound
Display
TAB
Connection SELECT
RETURN
Others
OK
Manual Tuning
You can add or delete channels, or change programme positions.
5
Press [3, 4] to select "Manual
Tuning" and press [OK].
Manual Tuning
If you delete programme position
of Host channel, GUIDE Plus+ data
is also deleted. Continue?
Yes No
If you select "Yes" and press [OK], the following screen
appears.
Manual Tuning
Pos Name Ch Pos Name
1 ARD 4 11
2 ZDF 2 12
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6 16
7 17
SELECT
8 18
OK
9 19
RETURN
10 20
Delete Move
Add
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Red" button.
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Green" button.
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
the "Yellow" button.
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [OK].
[Note]
≥When the unit connected to a Q Link compatible TV with a fully
wired 21-pin Scart cable sets itself automatically (➡ 20), only
deletion of the programme position can be performed.
≥If you delete programme position of Host Channel, the GUIDE
Plus+ data is also deleted.
Ch
∫ To change the tuning settings for individual
programme position
6
Press [3, 4, 2, 1]
to select a
programme position
and press [OK].
Press [3, 4] to select an item and press [1].
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [OK].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between "Z" and "¢".
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press [OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to "Auto".
Video To select the video system type
Press [3, 4] to select "PAL" or "SECAM" if the
System
picture lacks colour, and press [OK].
Auto: This unit automatically distinguishes
PAL and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo or bilingual broadcast, and press
[OK].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [OK].
≥To find the correct title page for the station, refer
to its Teletext TV guide.
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step 5.
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
Pos 1
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Video System Auto
Mono
Off
SELECT
Title Page
301
RETURN
RETURN : leave
RQT8881
67