Recording From A Video Cassette Recorder; Manual Recording; Dv Automatic Recording (Dv Auto Rec) - Panasonic Diga DMR-E95H Operating Instructions Manual

Recording from a video cassette recorder

DVD POWER
TV
POWER
INPUT SELECT TV/VIDEO
INPUT SELECT
HDD
1 2
4 5
7 8
CANCEL
0
SKIP
;
STOP
∫
DIRECT NAVIGATOR
TOP MENU
SUB MENU
PROG/CHECK
DISPLAY
SETUP ERASE
Info DUBBING
e.g.: Connecting other video equipment to the L2 or DV input
terminals
≥Turn off the unit and other video equipment before connecting.
This unit
SD CARD PC CARD EJECT
POWER
L2 S-VIDEO IN VIDEO IN L/MONO AUDIO IN R DV IN
S-VIDEO IN VIDEO IN L/MONO - AUDIO IN - R
Yellow White Red
Audio/Video
S-Video
cable
§
cable
If the audio output of the other equipment is monaural, connect to L/
MONO.
§
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
When recording from the unit's DV terminal
Select the type of audio recording from "Select Audio CH for DV
Input" in the SETUP menu ( page 49).

Manual recording

[HDD] [RAM] [DVD-R]
Preparation
≥Connect a video cassette recorder to this unit's input terminals.
≥Press [HDD] or [DVD] to select the recording drive.
[Note]
When recording using this unit's input terminals, only the sound
received at the time of recording will be recorded.
As long as secondary audio that is recorded on the video cassette is
not output on the unit in play, it is not recorded.
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to L2 input terminals, select "L2".
2
Press [REC MODE] to select the
recording mode.
VOLUME
CH
HDD, DVD
DVD SD/PC
PAGE
3
CH
6
AUDIO
9
VCR Plus+
CM SKIP
SLOW/SEARCH
PAUSE PLAY/x1.3
FUNCTIONS
FUNCTIONS
3 4 2 1
ENTER
ENTER
RETURN
TV GUIDE
TIME SLIP
REC MODE
REC MODE REC
¥ REC
CHAPTER STATUS
OPEN/CLOSE
REC
TIME SLIP HDD DVD SD PC DRIVE SELECT / x 1.3
TIME SLIP CH
DV IN
DV Cable
(IEEE 1394, 4-pin)
Other video
equipment
3
Start play on the other equipment.
4
Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
To record programs to fill up the remaining space on the disc
page 18, Flexible Recording
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.

DV automatic recording (DV AUTO REC)

[HDD] [RAM]
When the "DV AUTO REC" function is used, programs are recorded
as a title while at the same time chapters are created at each break
in the images and the play list is created automatically.
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit's DV input terminal (
2 Turn on the main unit and DV equipment.
3 Pause play of the DV equipment at the point you want recording
to start.
4 Press [HDD] or [DVD] to select the recording drive.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "DV
AUTO REC" and press [ENTER].
3
Press [REC MODE] to select the
recording mode.
4
Press [2, 1] to select "Rec" and
press [ENTER].
Recording starts.
When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV
automatic recording.
To stop recording
Press [∫].
[Note]
≥Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
≥It is not possible to operate the unit from the connected DV
equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape of the DV equipment will
not be recorded.
≥You cannot record and play simultaneously.
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording ( left).
left).
RQT7392
41