Frequently Asked Questions - Panasonic Diga DMR-E95H Operating Instructions Manual

Frequently asked questions

Set up
What equipment is necessary to play
multi channel surround sound?
Are the headphones and speakers
directly connected to the unit?
The television has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should I
connect with?
Is my television progressive output
compatible?
Disc
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?
Can a DVD-Video that does not have
a region number be played?
Please tell me about DVD-R and
DVD-RW compatibility with this unit.
Please tell me about CD-R and CD-
RW compatibility with this unit.
Recording
Can I record from a commercially
purchased video cassette or DVD?
Can a DVD-R recorded on this unit
be played on other equipment?
How many times can I write to a
DVD-RAM disc?
Can I high speed transfer (dub) to a
disc?
Can I record digital audio signals
using this unit?
Can a digital audio signal from this
unit be recorded to other
equipment?
Can I switch to SAP during
recording?
TV Guide On Screen
I do not want TV Guide On Screen
system to automatically appear on
screen.
I do not want to use TV Guide On
RQT7392
Screen TM system.
54
≥ DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
≥You cannot directly connect to the unit. Connect through the amplifier, etc.
≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (P
high fidelity in reproducing colors.
If the television is compatible with progressive output, a high quality picture can be
output because this unit's component video output terminal outputs a progressive
output signal.
≥All Panasonic televisions that have 480P input terminals are compatible. Consult the
manufacturer if you have another brand of television.
≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if their region number does not include "1" or
"ALL".
≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that
are finalized.
≥This unit also records and plays high speed recording compatible discs.
≥This unit does not record or play DVD-RW.
≥This unit plays CD-R/CD-RW discs (audio recording discs) which have been recorded
under one of the following standards: CD-DA, MP3 and Video CD. Close the session or
finalize the disc after recording.
≥You cannot write to a CD-R or CD-RW with this unit.
≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
≥You can play on DVD-R compatible players after finalizing the disc on this unit; however,
due to the condition of the recording, play may not be possible.
≥You can write to the disc approximately 100,000 times depending upon the conditions of
use.
≥You can record up to 32k recording speed to DVD-R and up to 24k recording speed to
DVD-RAM when using a high speed compatible disc.
≥You cannot record digital signals. The digital audio terminals on this unit are for output
only. (The audio recorded using the DV automatic recording function from a digital video
camcorder, for example, is recorded digitally.)
≥You can record if using the PCM signal. When recording DVD, change the "Digital Audio
Output" settings to the following from the SETUP menu.
–PCM Down Conversion
–Dolby Digital
–DTS
However, only
–As long as digital recording from the disc is permitted.
–As long as the recording equipment is compatible with a sampling frequency of 48
kHz.
≥You cannot record MP3 signals.
≥With HDD and DVD-RAM, you can, and the audio recorded also changes. Just press
[AUDIO].
≥With DVD-R, you cannot. Change before recording with "Select MTS" in the SETUP
menu.
TM system
≥Select "Off" in "Review options" menu, so that TV Guide On Screen
TM
only when you press [TV GUIDE].
≥Set the unit with "Auto Channel Setting". Note that you can set timer recording only
manually after you set the unit with "Auto Channel Setting".
/P ) and luminance signal (Y) separately in order to achieve
B R
On
PCM
PCM
Page
9
—
9
7
—
—
Cover
—
—
—
—
14, 27
—
—
45
—
37
—
49
—
17
48
TM system appears 23
50