Timer Recording; Code - Panasonic Diga DMR-E85H Operating Instructions Manual

Timer recording

DVD
TV
Í DVD
INPUT SELECT
AV
HDD DRIVE SELECT
1 2
Numbered
4 5
buttons
7 8
CANCEL
¢ CANCEL
0
SKIP
STOP PAUSE
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
SUB MENU
PROG/CHECK
DISPLAY
PROG/CHECK
TIMER ERASE
F TIMER
F
DUBBING
A B
[HDD] [RAM] [DVD-R]
You can enter up to 32 programmes up to a month in advance.
Using G- system to make timer

CODE

recordings
Entering G- numbers is an easy way of timer recording. You can
CODE
find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
G-Code Remain HDD 30:24 SP DVD
12:53:00 15. 7. TUE
Enter G-Code Number by using 0-9 keys.
2
Press the numbered buttons to enter
the G- number.
CODE
Press [2] to move back to correct a digit.
3
Press [ENTER].
TIMER
Remain HDD 30:24 SP DVD
RECORDING
12:54:00 15. 7. TUE
HDD
Name Date Start Stop Mode
DVD
1 ARD 15/ 7 TUE 19:00 20:00 SP HDD
Programme Name
≥Confirm the programme and make corrections if necessary
using [3, 4, 2, 1] (➡page 18, step 3).
≥When "-- ---" appears in the "Name" column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
≥You can also press [REC MODE] to change the recording
mode.
≥You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" (➡right, Relief Recording).
≥RENEW (Auto Renewal Recording) [HDD] (➡page 18)
ON!)OFF
≥Programme Name
Press [2, 1] to select "Programme Name" and press
[ENTER] (➡ page 30).
VOLUME
CH
HDD, DVD
DVD
3
CH
6
G-Code
G-Code
9
MANUAL SKIP
-/--
SLOW/SEARCH
PLAY/x1.3
FUNCTIONS
ENTER
RETURN
STATUS TIME SLIP
REC MODE REC
REC MODE
CREATE
AUDIO
CHAPTER
C
1:58 SP
1:58 SP
4
Press [ENTER].
The settings are stored.
TIMER
Remain HDD 30:24 SP DVD
RECORDING
12:55:00 15. 7. TUE
HDD
No. Name Date Start Stop Mode
DVD
01 ARD 15/ 7 TUE 19:00 20:00 SP
New Timer Programme
Repeat steps 1–4 to programme other recordings.
5
Press [F TIMER].
"F" lights on the unit's display to indicate timer recording
standby has been activated.
≥The message screen
appears. Only play is
possible while timer
recording is in standby (➡page 20, 21). (You cannot play a
title recorded using a different encoding system from that of
the TV system currently selected on the unit.)
≥The unit is not off. To save power, turn the unit off by
pressing [Í DVD].
∫ To release the unit from recording standby
Press [F TIMER].
"F" goes out.
≥Be sure to press [F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if "F" is displayed.
∫ To cancel recording when recording has
already begun
Press [F TIMER].
≥You can also press and hold [∫] on the main unit for more than
3 seconds to stop recording.
[Note]
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even
when playing.
≥Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode (➡ page 31).
≥"F" flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the "F" flashes on the unit display. In this case,
press [F TIMER] to put the unit in the timer recording standby
mode.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R).
∫ Relief Recording
When the recording drive is set to "DVD" for timer recording and
if the programme will not fit onto the disc, the recording drive will
be altered to the "HDD" automatically.
≥If there is no disc in the tray or the disc cannot be recorded on
or when timer recording starts while transferring (dubbing), the
recording drive will be altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (" " is displayed.) (➡ page 20).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
1:58 SP
Disc
space
Check to make sure
OK
"OK" is displayed.
Timer standby is active, only playback is possible.
RQT7462
17