Changing The Player Settings; Reference - Panasonic DVD-S533 Operating Instructions Manual

Changing the player settings

1 2
Select
Shows
Setup
menu.
• The settings remain intact even if you switch the unit to standby.
• Underlined items are the factory preset.
The QUICK SETUP enables successive settings of the items in the shaded area.
"DISC" menu

SETTING STATE Display the current setting of the items below
AUDIO
ENGLISH FRENCH SPANISH ORIGINAL
Choose the audio OTHER ---- 2
language.
SUBTITLE
AUTO 3 ENGLISH FRENCH SPANISH
OTHER ----
2
Choose the subtitle
language.
MENUS
ENGLISH FRENCH SPANISH OTHER ----
Choose the language
for disc menus.
RATINGS
Setting ratings (When level 8 is selected)
Set a ratings level to 0 LOCK ALL: To prevent play of discs without
limit DVD-Video play.
1 to 7: To prohibit play of DVD-Video with corresponding
ratings recorded on them.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video
exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
PASSWORD 1. Select "CHANGE" and press [ENTER].
Change the password 2. Enter the current password with the numbered buttons,
for "RATINGS" then press [ENTER].
( above). 3. Enter the new password with the numbered buttons,
then press [ENTER].
If "VERIFY" is displayed, please verify the password
and insert it again.
1
The original language designated on the disc is selected.
2 Input a code number referring to the table ( page 21).
3 If the language selected for "AUDIO" is not available, subtitles appear in that
language (If available on the disc).
3
Select
Select the
menu.
Register
1
2
ratings levels.
4
Select
Select the
item.
Register
"VIDEO" menu

SETTING STATE Display the current setting of the items below
TV ASPECT 4:3PAN&SCAN
Choose the setting to suit your
The sides of the picture are cut off so it fills
television and preference. the screen (unless prohibited by the disc).
4:3LETTERBOX
To select how to show images
Picture is shown in the letterbox style.
made for 16:9 aspect screens
on a 4:3 aspect television.
4:3ZOOM
• 4:3PAN&SCAN
• 4:3LETTERBOX Scales down the horizontal edges of a 4:3
• 4:3ZOOM aspect ratio image.
16:9NORMAL
To select how to show images
Stretches a 16:9 aspect ratio image horizontally.
made for 4:3 aspect screens
on a 16:9 aspect television.
16:9SHRINK
• 16:9NORMAL
Displays a 4:3 aspect ratio image in the center
• 16:9SHRINK
of the screen.
• 16:9ZOOM
16:9ZOOM
Adjusts the horizontal width to display a full
screen image in 16:9 aspect ratio.
TV TYPE STANDARD CRT LCD PROJECTION PLASMA
Select to suit the type of television.
TIME DELAY
When connected with an AV amplifier and Plasma display, adjust
if you notice the audio is out of sync with the video.
STILL MODE AUTO
Specify the type of picture FIELD: The picture is not blurred, but picture quality is lower.
shown when paused. FRAME: Overall quality is high, but the picture may appear blurred.
BLACK LEVEL LIGHTER: When connected through VIDEO OUT or S
Change the black level of the
DARKER: When connected through COMPONENT VIDEO OUT.
picture if you connected a television
through the COMPONENT VIDEO •
OUT terminals.
VIDEO OUT (I/P) INTERLACE PROGRESSIVE
Select "PROGRESSIVE" only When you select "PROGRESSIVE", a message screen will appear.
if connecting to a progressive
•
output compatible television.
•
1 2 3
Make the
4 5 6
settings.
8 9
7
0
Register
0 ms
60 ms
VIDEO OUT.
This setting is irrelevant when connected through the
HDMI AV OUT terminal.
For progressive output, press [e] and then press [ENTER].
Press [RETURN] to cancel.
5
Press to
exit.
20 ms 40 ms
80 ms 100 ms
19