Table of Contents
Advertisement
Changing the player settings
"AUDIO" menu
SETTING STATE
Display the current setting of the items below
UP TO 48kHz: When connected to equipment compatible
PCM OUTPUT
Check the digital
input limitations of the
UP TO 96kHz: When connected to equipment compatible
equipment you connect
using COAXIAL terminal
•
Signals from copy-protected discs are converted to 48
and select the maximum
or 44.1 kHz.
sampling frequency of
•
Some equipment cannot handle sampling frequencies
PCM digital output.
of 88.2 kHz, even if they can handle 96 kHz. Read your
equipment's operating instructions for details.
BITSTREAM
DOLBY DIGITAL
PCM
With COAXIAL or HDMI
AV OUT connections
( pages 8 and 9)
DTS
BITSTREAM
PCM
With COAXIAL or HDMI
AV OUT connections
( pages 8 and 9)
DYNAMIC RANGE
ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest sound level
and the highest sound level. Convenient for late night
viewing. (Only works with Dolby Digital.)
OFF
When audio is output from HDMI AV OUT terminal, and the connected equipment
does not support the item selected, the actual output will depend on the performance
of this connected equipment.
"DISPLAY" menu
SETTING STATE
Display the current setting of the items below
LANGUAGE
ENGLISH
"HDMI" menu
SETTING STATE
Display the current setting of the items below
VIDEO PRIORITY
ON: When connected through the HDMI AV OUT terminal.
OFF: When connected through the COMPONENT
20
with 44.1 or 48 kHz
with 88.2 or 96 kHz
Select "BITSTREAM" when the equipment
can decode the bitstream (digital form of
multi-channel data). Otherwise, select "PCM".
(If the bitstream is output to the equipment
without a decoder, high levels of noise can be
output and may damage your speakers and
hearing.)
FRANÇAIS
ESPAÑOL
Video is output from the HDMI terminal. Video is also
output from the COMPONENT VIDEO OUT terminal,
but only in 480i (interlace).
VIDEO OUT terminal. Video is output from the
COMPONENT VIDEO OUT terminal according to the
setting of "VIDEO OUT (I/P)" ( page 19, "VIDEO"
menu). Video is also output from the HDMI terminal.
AUDIO OUT
ON: Audio output is from HDMI AV OUT terminal.
OFF: Audio output is not from HDMI AV OUT terminal.
RGB RANGE
STANDARD
ENHANCED: When the black and white images are not distinct.
•
It only works when the COLOR SPACE ( page 18,
On-Screen Menu 4) is set to RGB.
EZ Sync
ON: The EZ Sync
( page 24).
OFF
"OTHERS" menu
SETTING STATE
Display the current setting of the items below
REGISTRATION
SHOW CODE: You need this registration code to purchase
Displays the unit's
and play DivX Video-on-Demand (VOD) content
registration code.
( page 24, About DivX VOD contents).
JPEG TIME
To change the slideshow timing
1 SEC to 15 SEC (in 1 unit)
60 SEC to 180 SEC (in 30 unit)
•
"3 SEC" is the factory preset.
FL DIMMER
BRIGHT DIM
AUTO: The display is dimmed, but brightens only when you
Changes the brightness
of the unit's display.
perform some operations.
AUTO POWER OFF
ON: The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
QUICK SETUP
SET: Displays the QUICK SETUP settings
DVD-VR/DATA
DVD-VR: To play
Select format to play
DATA: To play
DVD-RAM discs.
DEFAULTS
RESET
This returns all values in
The password screen is shown if "RATINGS" ( page 19) is
the Setup menus to the
set. Please enter the same password and press [ENTER],
default settings.
then turn the unit off and on again.
TM
"HDAVI Control
TM
" is available
15 SEC to 60 SEC (in 5 unit)
on DVD-RAM.
DVD-VR
or
contents on DVD-RAM.
MP3
JPEG
Hide quick links:
Advertisement
Table of Contents
