Feature Reference
•
If this parameter is set to "0", no throat formant effect can be applied via a
controller.
Intens
≤
-127 ... 127.
Sets the intensity of the throat formant effect. Higher values in both the positive and
negative ranges increase the intensity of the throat formant effect.
•
If this parameter is set to "0", no throat formant effect can be applied via a
controller.
HPF Cutoff Frq
≤
31.1 Hz ... 21.6 kHz.
Sets the cutoff frequency of the throat formant high-pass filter. Noise components
below the specified frequency are cut off.
LPF Cutoff Frq
≤
31.1 Hz ... 24.0 kHz.
Sets the cutoff frequency of the throat formant low-pass filter. Noise components
above the specified frequency are cut off.
•
Virtually no throat formant sound will be produced if the high-pass filter is set
to a higher cutoff frequency than the low-pass filter.
Edit Mode
92