Honeywell MRP-2002 Instruction Manual page 79

Maintenance Programming Level
A flashing cursor will appear on the left side of the display. Enter the four digit number
corresponding to the time (0000 - 1259). When the fourth digit is entered, the cursor will move one
position to the right. Press 1 for AM or 2 for PM to complete entering the time. The display will
return to the Time and Date Screen displaying the new time.
To change the date, press 2 while viewing the Time and Date Screen. The following screen will be
displayed:
A flashing cursor will appear on the left side of the display. Enter the two digit month, two digit day
and four digit year. The cursor will move one position to the right after each entry. When the fourth
digit of the year has been entered, the display will return to the Time and Date Screen which will
show the new date.
To change between 12 hour and 24 hour format, press 3 for Clock Format while viewing the Time
and Date screen. Each press of the 3 key will toggle the display between 12 HR and 24 HR format.
MRP-2002 Series Instruction Manual — P/N 53049:E5 7/28/2016
ENTER DATE
✱✱-✱✱-✱✱✱✱
MONTH DAY YEAR
09-21-2014
Date Screen
Programming
79