Audi A8 1994 ➤
Body repairs - Edition 10.1998
3.1.2
Replacement parts
Luggage compartment panel/side panel
Solid rivets
Body - adhesive
3.1.3
Welding in
Preparing new parts
– Match up new parts to body.
– Prepare flanges on body and new parts for welding.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Note:
Check dimensional accuracy with bumper guide and recess.
– Prepare joints for adhesive application.
Note:
Refer to General notes on bonding.
– Apply adhesive.
– Punch flanges.
Note:
Use clamps.
– Fit solid rivets in side panel and rear cross panel.
74
Rep. Gr.53 - Body - rear