Xerox Phaser 6360 User Manual page 70

5.
6.
Printing Glossy Paper from Trays 2–5
1.
2.
Downloaded From ManualsPrinter.com Manuals
On the control panel, select the glossy paper type and size:
a. Select
Change setup
b. Select , and then press the OK button.
Glossy Paper
c. Select the paper size, and then press the OK button.
In the printer driver, select either Glossy Paper as the paper type or Tray 1 (MPT) as the
paper source.
Pull the tray out of the printer.
If necessary, open the paper guides:
■ Squeeze the green tab on the length guide, and then slide it back. The guide clicks into
place.
■ Slide the green side guides outward.
Phaser® 6360 Color Laser Printer
, and then press the OK button.
3-41
Printing on Specialty Media
6360-020
6360-021