Help Guide | Terminating The Bluetooth Connection (After Use) - Sony SRS-HG1 Help Manual

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Terminating the BLUETOOTH connection (After use)
When you finish playing music with the BLUETOOTH device, perform any of the following operations to terminate the
BLUETOOTH connection.
Turn off the BLUETOOTH function on the BLUETOOTH device. For details, refer to the operating instructions supplied with
the device.
Turn off the BLUETOOTH device.
Turn off the speaker.
Touch the paired device to N-Mark of the speaker again (for the NFC-compatible device).
Hint
If no operation is performed and no music (sound) is input by a BLUETOOTH device for about 15 minutes, the speaker enters the standby mode
automatically by the auto standby mode, then the BLUETOOTH connection terminates. If the speaker is in the BLUETOOTH connection by HFP, it
is not automatically disconnected.
When you finish playing music, the BLUETOOTH connection may terminate automatically, depending on the BLUETOOTH device.
Related Topic
Auto standby mode
Disconnecting the NFC-compatible device by one touch (NFC)
4-589-712-11(2) Copyright 2016 Sony Corporation
166